Led Lamp Display - Nikon PD-10 Manual De Instrucciones

LED Lamp Display

The POWER, LINK and BUSY lamps (c3) indicate the following after the printer and camera are set up.
During printing standby, each lamp displays the color corresponding to the check mark ( ).
Lamp Display
POWER Lights
LINK Lights in yellow green
Lights in orange
Blinks rapidly in orange for about 3 seconds
BUSY Lights in yellow green
Blinks in yellow green
Blinks rapidly in yellow green for about 3 sec-
onds
Blinks in orange
Lights in orange for about 3 seconds
Blinks rapidly in orange for about 3 seconds
Blinks alternately in orange and yellow green Resetting (c10)
Note
• If the connection with the camera is not established (when the BUSY lamp is not lit) and no operations are performed for about three minutes,
the PD-10 automatically turns off in order to reduce power consumption.
• If in printing standby (indicated by the check marks in the chart above) for 10 minutes, the PD-10 automatically turns off.
Status
Power is on
Ready for wireless connection
Not ready for wireless connection
There is a problem with the wireless connection.
Printing standby
Transferring data for printing
There is a problem transferring data for printing.
Setting Profile Information on the camera
Profile Information setup on the camera complete
There is a problem setting Profile Information on the camera.
En
Printing standby
9