Tabla de contenido
Publicidad
Trigger
Installation of the protection device
•
Before switching on and using the equipment, install the
protection device.
•
The equipment is already assembled when delivered with
the exception of the protection device. It is conditioned
together with the equipment in the same package. To
assemble it, turn the equipment upwards (Fig. 1)
•
Place the protection device as per drawing, and fit it in
lock (3) (Fig. 2). Press it to the body (4), put screws (2) in
position and tighten them (Fig. 1).
•
If you use the equipment without the protection
device, you will not be entitled to the warranty.
Warning!
All and every maintenance or cleaning shall be
done with the equipment turned off and
unplugged.
MAIN COMPONENTS
Handle
Adjustable Handle
Extension
Cord Lock
Adjustable Support
Wheel
USE AND OPERATION INSTRUCTIONS
Locking Lever
Body
Protection Device
Spool Set
1 Protection device
2 Screws
3 Lock
4 Body
Fig. 1
3 Lock
Fig. 2
3
Publicidad
Tabla de contenido
