Connecting To Power; Powering The Dash Cam On / Off; Auto Power On/Off; Manual Power On/Off - Polaroid PD-G55H Manual Del Usuario

2 2 .2 Connecting to Power

Use only the supplied car adapter to power up the device and charge the built-in battery.
1. Connect one end of the car adapter to the USB connector of the Dash Cam.
2. Plug the other end of the car charger to the cigarette lighter socket of your vehicle. Once the vehicle
engine is started, the Dash Cam automatically powers on.
Note:
Please take note if the environment temperature reaches 115°F or above, the car adapter still
can supply power to Dash Cam, but it may not charge the battery. This is characteristic of Lithium
polymer battery and is not a malfunction.

2.3 Powering the Dash Cam On / Off

2.3.1

Auto Power On/Off

Once the vehicle engine is started, the Dash Cam automatically turns on. If the Automatic Record
function is enabled, the recording will automatically start right after the Dash Cam powers on.
Once the vehicle engine shuts down, the Dash Cam automatically saves the recording and turns off the
power within 10 seconds.
2.3.2

Manual Power On/Off

To manually turn on the power, press the POWER button.
To turn off, press and hold the POWER button for at least 3 seconds.