Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
How to Clean
1. Unplug unit from electrical outlet.
2. Wash lid, ice shaving chamber, front
housing with shaving blade, mixing
paddle, and bowl in hot, soapy
water. Rinse and dry.
All removable parts may be washed
on the top rack of a dishwasher, or
if an energy saver mode is used, top
or bottom rack.
3. Wipe the base with a damp cloth.
Dry with a soft, dry cloth.
Do not use abrasives.
Troubleshooting
PROBLEM
Ice not shaving.
Mixing paddle
not turning.
Unit is leaking.
840154601 ENv01.indd 5
840154601 ENv01.indd 5
wWARNING
• Disconnect power before cleaning.
• Do not immerse cord, plug or base
in any liquid.
Failure to follow these instructions
can result in death or electrical
shock.
• Avoid contact with shaving blade.
• Do not use if shaving blade is loose,
cracked, bent or damaged.
PROBABLE CAUSE/SOLUTION
• Turn off. Redistribute ice in chamber.
• Is lid completely locked into interlock (power Start/
Stop) switch?
• Is unit plugged in?
• Is front housing locked into base?
• Is the shaft locked into position?
• Ensure ice shaving chamber is placed in front
housing AFTER the front housing has been
locked onto the base.
• Make sure bowl has been turned clockwise to
stop at post on base
• Unshaven ice may melt and drip onto base,
giving the appearance of leakage. Wipe base dry
with a soft cloth. See "How to Clean."
Electrical Shock Hazard
WARNING
Cut Hazard
5
12/14/12 10:04 AM
12/14/12 10:04 AM
Publicidad
Tabla de contenido
