Tas Configuration - ViewSonic NMP-530 Manual De Instrucciones

TAS C
This screen works in conjunction with TAS. (TAS software can be purchased through Tivella at
www.tivella.com or through an authorized Tivella dealer/reseller.) Under Management click TAS.
The screen shown below appears.
E
N
G
L
I
S
H
1. In the Timeout (sec) field, type the number of seconds for the NMP-530s to access TAS.
2. In the IP Address field is a valid DNS name automatically generated by TAS when connected
to a network: when used as a standalone, the field is blank.
3. If any changes were made to this screen, do the following:
• To enable the changes, click Apply
• To save the changes, under Administration click Save Configuration > click Save.
16
ONFIGURATION
ViewSonic NMP-530