Publicidad
Idiomas disponibles
Idiomas disponibles
FAILURE TO OBSERVE THESE WARNINGS
this instruction Manual contains important
safety information.
reAd this instruction MAnuAl cArefully
And understAnd All inforMAtion before
operAting this tool.
• Always operate, inspect and maintain this
tool
National
Code
B186.1) and any other applicable safety
codes and regulations.
• For
maximum durability of parts, operate
this tool at 90 psig; 6.2 bar max
air pressure with 3/8" diameter air supply
hose.
• Always wear impact-resistant eye and face
protection when operating or performing
maintenance on this tool.
• Always wear hearing protection when using
this tool. High sound levels can cause
permanent hearing loss. Use hearing
protection as recommended by your
employer or OSHA regulation.
• Keep the tool in efficient operating
condition.
• Operators and maintenance personnel
must be physically able to handle the bulk,
weight and power of this tool.
• Compressed air can cause severe injury. Never
direct
Always turn off the air supply, drain
hose of air pressure and detach tool
from air supply before installing, removing
or adjusting any accessory on this tool,
or before performing any maintenance
on this tool. Failure to do so could result
in injury. Whip hoses can cause serious injury.
Always check for damaged, frayed or loose
hoses and fittings, and replace immediately.
Do not use quick detach couplings at tool.
See instructions for correct set-up.
SX260A
SX260A_manual_031507.indd 2
COULD RESULT IN INJURY
in
accordance
with
American
Standards
Institute
Safety
of
Portable
Air
Tools
(ANSI
safety,
top
performance
air
at
yourself
or
others.
• Air powered tools can vibrate during use.
• Place the tool on the work before starting
• Slipping, tripping and/or falling while
and
• Keep body working stance balanced and
• Anticipate and be alert for sudden changes
• Do not carry tool by the hose. Protect the
• Tool shaft may continue to rotate briefly
• Keep away from rotating end of tool.
• Do not lubricate tools with flammable or
• Do not force tool beyond its rated capacity.
• Do not remove any labels. Replace damaged
• Use
2
Vibration,
repetitive
motions
uncomfortable positions over extended
periods of time may be harmful to your
hands and arms. Discontinue use of tool if
discomfort, tingling feeling or pain occurs.
Seek medical advice before resuming use.
the tool. Do not point or indulge in any
horseplay with this tool.
operating air tools can be a major cause
of serious injury or death. Be aware of
excess hose left on the walking or
work surface.
firm. Do not overreach when operating
the tool.
in motion during start up and operation
of any power tool.
hose from sharp objects and heat.
after throttle is released.
Avoid direct
contact with accessories during and after
use. Gloves will reduce the risk of cuts
or burns
Do not wear jewelry or loose clothing.
Secure long hair. Scalping can occur if
hair is not kept away from tool and
accessories. Choking can occur if neckwear
is not kept away from tool and accessories.
volatile liquids such as kerosene, diesel or
jet fuel.
labels.
accessories
recommended
Sunex Tools
®
.
Rev. 03/5/07
or
by
3/16/07 4:20:31 PM
Publicidad
