Remote Control - Precision PA0825B Manual Del Usuario

1.AUX Input (RCA): The RCA Input is designed to connect directly to a
CD/DVD/TV or any other stereo level audio device. Please note that there
are two LINE (AUX) Inputs, RCA and 1/8". If both the RCA and 1/8"inputs
are connected, the unit will automatically play from the 1/8" Line input.
2.Antenna is for receiving the FM signal. Before use, extend the telescopic
FM antenna. Pack up the FM antenna to better protect it after use.
3. AC Adaptor: If the unit needs to be charged, connect the adaptor.
4. Power button: There are three possible settings. Setting the unit to BATT will
allow the unit to play using only the internal battery. When set
to AC (adaptor), the unit can also be powered by an external adaptor even if the
battery is dead.
*In AC(adaptor) setting the unit will be charging, but it will do it very slowly. To
charge the unit properly, set the unit to OFF.
5. DC 12V IN is for connecting to a 12V external battery if needed. Make
sure to connect positive to positive (red +) and negative to negative
(black -).
6. LED LIGHT SWITCH: Setting the button to ON will allow the LED light on. When
set to OFF , the LED light will off.

REMOTE CONTROL

1. POWER: Press this button to stand by ON/OFF
the unit. Four dots (- - - -) are displayed when
the unit is in standby.
2. INPUT: Press this button to toggle between the
various inputs: LINE (AUX), USB/SD, FM,
Bluetooth.
3. KEY Number for selecting the tracks for
USB/SD or stored channel in FM.
4. MUTE: Press this button to mute.
5. VOL+: Press this button to increase the volume.
6. VOL-: Press this button to reduce the volume.
7. CH-/ : Press this button to select the previous
track or stored channel for USB/SD/Bluetooth/
FM. When on USB/SD mode, hold this button to
fast backward.
8. CH+/ : Press this button to select the next
track or stored channel for USB/SD/Bluetooth/
FM. When on USB/SD mode, hold this button to
fast to forward.
9. EQ: Press this button to select a different EQ
mode for USB/SD.
3
7
11
4
5
6
10