Tivizen VTV-I12 Manual Do Usuário página 42

Using Battery
This product carries removable lithium ion battery. For the
first time use after purchasing the product, the battery may
not be sufficient. Please fully recharge the battery before
use.
Installing the Battery
① Push the battery cover and slide the
cover down in a direction of the
arrow to open the cover as shown in
the picture.
② Battery charge terminal and the
accessory charge terminal should
be engaged as shown in the figure.
Put the battery back properly. Push
it until it clicks.
③ Place the battery cover to the battery cover groove and
then push and slide it until it is properly fitted.
Recharging the Battery
① Insert the battery into the accessory.
② Use the provided charging cable to connect between
USB mini B port of the accessory and USB port of the PC.
* You can also use USB adaptor
If using the USB port of the PC
③ The Power & Battery Indicator of the accessory turns red
while charging is in process. When the battery is fully
recharged, the indicator turns green.
※1: The USB adaptor is not included (unbundled) in
the product package, which can be purchased
separately. It is recommended to use the USB
adaptor provided by Apple Inc.
※ 1
for this purpose.
If using USB adaptor
6