Tabla de contenido
Publicidad
Installation
Removing the unit
1. Press the detach button to release the
front panel.
• Refer to the Operation Manual about how to
release the front panel.
2. Insert the supplied extraction keys
into both sides of the unit until they
click into place.
3. Pull the unit out of the dashboard.
8
Installing the microphone
(MVH-8300BT only)
Install the microphone in a position and
orientation that will enable it to pick up the
voice of the person operating the system.
CAUTION
It is extremely dangerous to allow the microphone
lead to become wound around the steering
column or gear shift. Be sure to install the unit in
such a way that it will not obstruct driving.
When installing the microphone
on the sun visor
1. Install the microphone on the
microphone clip.
Microphone
Microphone clip
2. Install the microphone clip on the sun
visor.
• With the sun visor up, install the microphone
clip. (Lowering the sun visor reduces the voice
recognition rate.)
Clamp
• Use separately sold clamps to secure the lead
where necessary inside the vehicle.
Microphone clip
Publicidad
Tabla de contenido
