Connecting The Pdu - Tripp-Lite PDUMH15NET Manual Del Propietário

Installation
1-4
Under-Counter Mounting: Use 3
screws to attach each of the 2
A
shorter mounting brackets
the PDU as shown. Mount the
PDU under the counter by
inserting 2 or more user-supplied
screws through the mounting
C
brackets
B
mounting points.
1-5
Cord Retention Shelf
Attachment (Optional): Use 2
screws to attach the cord
A
retention shelf
panel of the PDU.

Connecting the PDU

2-1
Connect Input Plug Adapters
(Optional – PDUMH20NET Only):
The PDU includes an adapter that
converts its L5-20P locking input
plug to a standard 5-20P input
plug. Connecting this adapter is
optional. The PDU will function
normally without connecting this
adapter.
Note: The AC power source should not share a
circuit with a heavy electrical load (such as an air
conditioner or refrigerator).
2-2
Connect Input Power Cord
(PDUMH15NET and
PDUMH20NET): Connect the
input plug
A
source of AC power, such as a
UPS system, PDU or utility outlet.
The PDU should be provided with
over-current protection:
PDUMH15NET with a maximum
15A branch-rated protection
device; PDUMH20NET with a
maximum 20A branch-rated
protection device.
16-11-162-933687.indb 4
continued
to
B
and into secure
to the front
B
to a compatible
1-4
1-5
B
2-1
PDUMH20NET
2-2
4
A
B
C
A
A
1/3/2017 4:41:47 PM