Moulinex HM615 Manual De Instrucciones página 17

• Check that the appliance is
unplugged, that the speed control
is set to
neither blender shaft, nor mini-
chopper nor blender connected to
the back of the appliance.
• Insert the rods of each beater
or kneader
corresponding holes and lock into
place.
• Connect the appliance:
- To knead thick dough, we
recommend using speed
- You can also increase the speed
by pressing the turbo button. We
however recommend that you use
it only briefly (a maximum of 30
seconds for thick dough).
and that there is
into the
only.
• After finishing, set the speed control
to .
• Disconnect.
• Then press the ejection button
to remove the beaters or kneaders.
• Check that the appliance is
unplugged, that the speed control
is set to
no blender shaft.
• Insert the rods of each beater
or kneader
corresponding holes and lock into
place.
should be positioned to
the left, in the biggest hole
• Place the base
- To raise the arm, unlock by
pressing the button
- Position the bowl
- Press the button
- Place the mixer fitted with the
kneaders or beaters on the
hinged arm until you hear it click
into place
• Connect the appliance:
- Your appliance has 5 speed levels
13
and that there is
into the
on the worktop: