For The Installer; Electrical Requirements; Free Standing Installation; Installation Requirements - Monogram ZDIB50 Manual Del Usuario E Instrucciones De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FREE STANDING INSTALLATION

For the Installer

When this icemaker is installed free standing (not under a counter) we
strongly recommend that the bottom rear corners of the icemaker be
fastened to the floor to prevent accidental tipping.

INSTALLATION REQUIREMENTS

For the Electrician—Electrical Requirements
A 115 Volt, 60 Hz, AC only, 15 Amp fused electrical supply is required
(time delay fuse or circuit breaker is recommended). It is recommended that
a separate circuit, serving only this appliance, be provided. DO NOT use an
extension cord.
ELECTRICAL GROUND IS REQUIRED ON THIS APPLIANCE.
Recommended Grounding Methods
DO NOT, UNDER ANY CIRCUMSTANCES,
REMOVE THE POWER SUPPLY CORD
GROUND PRONG.
For your personal safety, this appliance must be
properly grounded.
This appliance is equipped with a power supply cord
having a 3-prong grounding plug. To minimize
possible shock hazard, the cord must be plugged into
a mating 3-prong grounding type wall receptacle,
grounded in accordance with the National Electrical
Code and local codes and ordinances. If a mating wall
receptacle is not available, it is the personal
responsibility and obligation of the customer to have a
properly grounded 3-prong wall receptacle installed
by a qualified electrician.
16
IMPORTANT...Please Read Carefully
3-Prong
Grounding Type
Wall Receptacle
3-Prong
Grounding
Plug
Power Supply
Cord

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Zdiw50

Tabla de contenido