1/2" N.P.T. Discharge
to Spray
1/2" N.P.T.
Supply to
1/2" N.P.T. Supply to
Hose &
Vacuum Breaker
Spray
13-1/2"
1-1/4"
(34.3cm)
3/8"
(3.2 cm)
N.P.T.
3/8" N.P.T
Inlet
5/16" (8 mm)
7-3/4"
(19.7 cm)
3" (7.6 cm)
Pedal in Raised
Position for
14" (35.6 cm)
Floor Cleaning
Before You Begin
CAUTION: Risk of property damage. To support the bedpan
washer and piping, provide sufficient reinforcement or mounting
brackets as required inside the wall.
NOTE: Refer to the roughing-in diagram for dimensional
information.
Shut off the main valve and water supply.
Observe all local plumbing codes and building codes.
Plumb using 1/2" NPT pipe, or 3/8" NPT pipe, or 1/2" copper
tubing, elbows, and adapters. Secure the piping to reinforcements
in the wall.
Provide pipe holes in the finished wall according to the
roughing-in diagram.
Kohler Co. reserves the right to make revisions in the design of
bedpan washers without notice, as specified in the Price Book.
Kohler Co.
1-3/8" (3.5 cm)
44" (111.8 cm) to
Floor Optional
3-7/8"
(9.8 cm)
2-1/4"
(5.7 cm)
2-3/4"
(7 cm)
3/8" Cold
1/2"
12-1/2"
(1.3 cm)
(31.8 cm)
2-3/16"
7-5/8"
(5.6 cm)
(19.4 cm)
3
3/4"
(2 cm)
2-7/8"
(7.3 cm)
5"
(12.7cm)
3 Mounting Holes
for 1/4" (6 mm)
Screws (Provide
Backing)
14"
(35.6 cm)
Finished
Floor
1034416-2-A