Publicidad
Idiomas disponibles
Idiomas disponibles
-Solvent based lubricants used,
- Belt is too tight.
Plug the unit into a wall socket with an
EARTH terminal. Set switch (L) to
Position [1].
ASSEMBLY INSTRUCTIONS.-
The assistance of a second person
is advisable for the assembly work.
Make sure that all of the pieces are
there, Fig.0:
(1) Main structure; (20) L-type wrench;
(55) Silicone oil; (96) Power cord; (103)
MP3 wire; (128) Safety key.
Follow the instructions step by step to
assemble:
1 Take the unit out of the box and
place it on the floor as shown in Fig.1.
2 Press the lever (135) with your foot,
Fig.1. You will hear a click sound. Lift
the columns until you hear another
click sound.
3 Hold the monitor with one hand and
unscrew the knob (147) with the other
by
turning
counterclockwise, Fig.2, and then pull
the knob out. Raise the monitor into
position and turn the knob (147)
clockwise to fix the position, Fig.2.
4 Press the handrail lever with your
finger and turn the handrail as shown
Fig.B
it
3-5
rounds
in Fig.3 to put it in position. Do the
same with the other handrail, Fig.3.
5 Put the security key (128) in its
compartment, Fig.4.
FOLDING YOUR UNIT.-
This treadmill is equipped with a
folding
mechanism
purposes. To use it, stop the treadmill
and unplug the mains cable.
and lift the unit until you hear lever
click into place, Fig.7. Store your unit
in a dry place, preferably not subject
to changes in temperature.
UNFOLDING YOUR UNIT.-
If you wish to use the treadmill, do the
reverse procedure. Use your foot to
press lever as shown in Fig.8 and
slowly lower the treadmill belt down to
the floor.
Press the handrail lever with your
finger and turn the handrails as shown
in Fig.5, I.
Hold the monitor with one hand and
unscrew the knob (147) with the other
by
turning
counterclockwise. Lower the monitor
to the position parallel to the column,
Fig.5 II.
Hold the right or left column with your
hand and press the lever (135) with
your foot, Fig.5, III. You will hear a
click sound. Put the column down.
Before moving or lifting the treadmill,
pull out the front supports, Fig.5, IV.
MOVEMENT & STORAGE.-
The unit is equipped with wheels (33),
Fig.6, to make it easier to move. Make
sure that the mains cable is unplugged
from the wall socket.
If you wish to move the treadmill, the
first thing to do is to fold it up, place
16
for
storage
it
3-5
rounds
Publicidad
