Reading Led Lamps - Panasonic CZ‑TAW1 Instrucciones De Operación

■
To register an additional user on the indoor unit
Multiple users (family members, for example) with different Panasonic IDs
can access the same indoor unit.
1 Additional user operations
1) Log into the service using the Panasonic ID of the
additional user.
2) Enter the Device ID and Device password that was
registered by the owner (the user that initially
registered).
3) Enter a message requesting approval from the owner.
∙ Enter a message so that the owner can identify the
person making the request.
2 Owner (the user that initially registered) operations
1) Log into the service using the Panasonic ID of the owner (the user that
initially registered).
∙ If there is a message requesting registration from an additional user,
a " " is displayed at the top left of the Top page.
2) Select " " .
∙ The request message from the additional user is displayed.
3) Select the appropriate privileges for the user and approve their request.
∙ After approving, the additional user will also be able to use the
AQUAREA Smart Cloud.

Reading LED Lamps

The lamps light and blink to notify you of the communication status and
possible errors.
Power LED
Status LED
Link LED
Lighting:
LED Status and Solution
A2W power off or cable not
connect
A2W power on before soft
wake up
A2W cannot connect
(Red Blinking)
Immediately after startup
Normal
User registration in
(Blue or Green Blinking)
Communication confirmation
6
1 s 0.2 s
OFF: Blinking:
LED Status and Solution
LAN (IP has not been
acquired)
(Blue or Green Blinking)
LAN (IP Retrieving)
(Blue or Green Blinking)
LAN (IP collision)
(Red and Blue or Green
Blinking)
LAN (Server interruption)
SSID or IP specified
(Blue or Green Blinking)
Firmware Updating
(Red and Blue and Green
Blinking)
Timer implementation in
(White and Blue or Green
Blinking)