NOTE: Please follow the instructions carefully to ensure a safe and sturdy bed. Do not
fully tighten the bolts until all rails and guardrails are attached.
1. Unpack the units and confirm that you have all hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Fit the Back Stretcher (K) onto the Back Legs (C and D) properly and fasten into place with two 5/8"
Bolts (1).
Assembly Instructions
K
C
K
C
K
1
1/4" x 5/8" Bolt
(2 used in this step)
①
3
D
C/D
D