Smanos DS2300 Manual Del Usuario página 3

EN
Installation
After confirming that the door/window contact works properly, the
installation steps can be proceed as follow:
Secure the transmitter and
magnet on the desired locations
(like door or window which can
be opened and closed) with
double-sided tapes.
Note: lf this product is installed on
a metal door, place spacers under
the transmitter and magnet. This
product is not suitable for shutter
doors, please purchase shutter
door sensor for your use.
Connect the Door/Window Contact
Connecting the door/window contact is to build a wireless
connection between the door/window contact and the control
panel.
1. Make sure the triangle mark is close to each other and within the
range of 1cm.
2. Control panel enters into the connecting state (For details, please
refer to the relative user manual).
3. Separate the transmitter and magnet with the space more
than 2 cm, the control panel beeps once, indicating successful
connection.
Note: If the control panel beeps twice when the above operation is done, it
means the contact has been connected before.
EN
≥2cm