Faucet Installation - Pfister Portland 42-P Serie Manual Del Usuario

Thank you for purchasing this Pfister product. All Pfister products are carefully engineered, and factory tested to provide long
trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated
instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238)
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding. Pfister
recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing
and building codes.
2
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are usually
found under the sink or near the water meter. If you are replacing an existing
faucet, remove the old faucet from the sink and clean the sink surface thoroughly.
3
3 TOOLS RECOMMENDED
•PTFE plumber's tap •Plumber's putty
•Philips head screwdriver •Pliers
•Flashlight •Cloth
Your installation may require new supply lines and / or shut-off valves or other
additional tools.
4
C
E
F
G
4 CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all of the following items are included.
A Faucet D Pop-Up Assembly
B Lift Rod E Channel (2x)
C Putty Plate F Sleeve (2x)
If any of these items are missing, please contact Pfister Consumer Service at
1-800-Pfaucet (1-800-732-8238).
•Slotted screwdriver
•Adjustable wrench
A
B
D
G Nut (2x)
ENGLISH

FAUCET INSTALLATION

5
BOTTOM GROOVE
5 PUTTY PLATE ATTACHMENT
Following manufacturer's recommendations on use, apply plumber's putty into
putty groove in bottom of Putty Plate (5A). Install the Putty Plate over the three
holes in your sink.
6
6A
6C
6 FAUCET INSTALLATION
Insert Faucet Shanks (6A) through the end holes of the sink. Press Faucet (6B)
onto Putty Plate (6C).
2
5A
6B
6A