Safety Symbols - Cub Cadet 19A30028100 Manual Del Operador

Embolsadora trasera doble
Ocultar thumbs Ver también para 19A30028100:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3.
Use slow speed. Choose a low enough speed setting so
that you will not have to stop or shift while on the slope.
Tires may lose traction on slopes even though the brakes
are functioning properly. Always keep machine in gear
when going down slopes to take advantage of engine
braking action.
4.
Follow the manufacturer's recommendations for wheel
weights or counterweights to improve stability.
5.
Keep all movement on the slopes slow and gradual. Do
not make sudden changes in speed or direction. Rapid
engagement or braking could cause the front of the
machine to lift and rapidly flip over backwards which could
cause serious injury.
6.
Avoid starting or stopping on a slope. If tires lose traction,
disengage the blade(s) and proceed slowly straight down
the slope.
Do Not:
1.
Do not turn on slopes unless necessary; then, turn slowly
and gradually downhill, if possible.
2.
Do not mow near drop-offs, ditches or embankments. The
mower could suddenly turn over if a wheel is over the edge
of a cliff, ditch, or if an edge caves in.
3.
Do not try to stabilize the machine by putting your foot on
the ground.
4.
Do not use a grass catcher on steep slopes.
5.
Do not mow on wet grass. Reduced traction could cause
sliding.

Safety Symbols

This table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the
machine before attempting to assemble and operate.
Symbol
WARNING!
follow the warnings and instructions in this manual and on the machine.
4
s
2 — i
ectiOn
MpOrtant
READ THE OPERATOR'S MANUAL(S)
Read, understand, and follow all instructions in the manual(s) before attempting to
assemble and operate
STOP
Turn off the engine before opening the bagger cover.
Your Responsibility—Restrict the use of this power machine to persons who read, understand and
SAVE THESE INSTRUCTIONS!
s
O
p
afe
peratiOn
ractices
General Service
1.
Before cleaning, repairing, or inspecting, make certain the
blade(s) and all moving parts have stopped. Disconnect the
spark plug wire and ground against the engine to prevent
unintended starting.
2.
Keep all nuts, bolts, and screws tight to be sure the
equipment is in safe working condition.
3.
Never tamper with your mower's safety interlock system
or other safety devices. Check their proper operation
regularly.
4.
Never attempt to make adjustments or repairs while the
mower's engine is running.
5.
Grass catcher components and the discharge cover are
subject to wear and damage which could expose moving
parts or allow objects to be thrown. For safety protection,
frequently check components and replace immediately
with original equipment manufacturer's (O.E.M.) parts only,
listed in this manual. Use of parts which do not meet the
original equipment specifications may lead to improper
performance and compromise safety!
6.
Maintain or replace safety and instruction labels, as
necessary.
Description

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido