Mettler Toledo Ariva Serie Guía Rápida página 13

Group 4
4.1 Button Tare
4.2 Chain Tare
4.3 Auto-clear of Button Tare
4.4
Preset Tare requires stable
weight
(only Ariva-S)
Group 5
5.1 Beeper
5.2 Blank Weight Enable
5.3 Zero cursor (ZERO)
5.4 (reserved)
5.5 (reserved)
ScaleSentry (only with
5.6
Magellan 9400i / 9800i)
EXIT
SAVE Save or abort and exit
Press Zero to enter Group 4
Press Tare to go to Group 5
ON – Enables button tare.
OFF – Disables button tare.
ON – Enables multiple tares.
OFF – Only one tare per transaction is allowed.
ON – Tare is automatically cleared when weight is removed.
OFF – Tare is not cleared when weight is removed.
Note: This function only applies to push button tares (it does not apply to preset
tares).
ON – Preset tare requires stable weight (Argentina)
OFF – Preset tare does not require stable weight (rest of world)
Note: Only Argentina requires this item to be set = ON.
Press Zero to enter Group 5
Press Tare to go to EXIT
0 – No beeper.*
1 – Scale beeps only when Keypad is pressed.
2 – Scale beeps only when data is sent to POS.
3 – Scale beeps with both POS data and keypad press.
*Note: The calibration button always beeps.
ON – Only display stable weight. (Display will be blank during weight settling
time)
OFF – Display weight all the time (even if unstable)
ON – Enable ZERO indicator.
OFF – Disable ZERO indicator.
NO – ScaleSentry not supported.
YES – ScaleSentry supported.
Press Zero to enter SAVE
Press Tare to go to Group 1
SAVE – Save all settings and reboot.
ABORT – Abort all settings and return to weighing mode.
30353726 | Ariva Quick Guide 13