Troubleshooting - Klarstein 10030930 Manual De Instrucciones

Cleaning the Door
To clean door, use only a soft warm, damp rag. To prevent penetration of water into the door lock do not use a spray
cleaner of any kind. Also, never use abrasive cleaners or scouring pads on the outer surfaces because they will scratch
the finish. Some papers towels can also scratch or leave marks on the surface.
How to Keep Your Dishwasher in Shape
• After every wash: Turn off the water supply to the appliance and leave the door slightly ajar so that moisture
and odors are not trapped inside.
• Remove the plug: Before cleaning or maintenance, always remove the plug from the socket.
• No solvents or abrasive cleaning: To clean the exterior and rubber parts of the dishwasher, do not use sol-
vents or abrasive cleaning products. Use only a cloth and warm soapy water. To remove spots or stains from
the surface of the interior, use a cloth dampened with water and a little white vinegar, or a cleaning product
made specifically for dishwashers.
• When You go on holiday: It is recommended that you run a wash cycle with the dishwasher empty and then
remove the plug from the socket, turn off the water supply and leave the door of the appliance slightly ajar.
This will help the seals last longer.
• Moving the Appliance: If the appliance must be moved, try to keep it in the vertical position. If absolutely
necessary, it can be positioned on its back.
• Seals: One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this.
Error codes
When some malfunctions happen, the appliance will display error codes to warn you:
Code Bedeutung
E1 Door open
E2 Water inlet
E3 Water drainage
E4 Temperature sensor
E5 Overflow/leakage
E6 Water leakage
E7 Heating element
E8 Water diversion system
IMPORTANT: If overflow occurs, turn off the main water supply before calling a service. If there is water in the
base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher.
42
Troubleshooting Tips
Mögliche Ursache
The door is opened when the dishwasher is operating
Water inlet malfunction
Water drainage malfunction
Temperature sensor malfunction
Overflow occurs/Water leakage occurs
Water leakage occurs
Abnormal heating
Water diversion system malfunction