Brother PRSCLP45B Manual De Instalación página 6

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
4 Use both hands to grasp the frame hooped
with the item, and then attach it to embroidery
frame holder D.
5 Insert the pins on embroidery frame holder
D into the holes on both sides of the clamp
frame to secure it.
1 Make sure that the pins on the embroidery frame
holder fit into the positioning slot and hole on
the embroidery frame.
■ Removing the clamp frame
While grasping the clamp frame with both
hands, lift up both springs with your fingers, and
then pull off the clamp frame toward you.
Note
● Be careful not to pinch your fingers with
the springs.
4/4