Tripp-Lite SNMPWEBCARD Manual De Instalación página 18

Installation
SNMPv3 Definitions
User Name
Authentication
Passphrase
Privacy Passphrase A phrase of 8 to 32 ASCII characters that ensures the
Authentication
Protocol
Privacy Protocol
Attach Faceplate: Using one hand to hold the card in place,
4-3
temporarily detach the network cable. Align and attach the faceplate
that matches your UPS system, using screws from the accessory slot
cover. Reattach the network cable.
13-01-199-933179.indb 18
The identifier of the user profile. SNMP version 3 maps
Gets, Sets and Traps to a user profile by matching the
user name of the profile to the user name in the data
packet being transmitted. A user name can have up to
32 ASCII characters.
A phrase of 8 to 32 ASCII characters that verifies
that the Network Management System (NMS)
communicating with this device through SNMPv3 is the
NMS it claims to be, that the message has not been
changed during transmission, and that the message
was communicated in a timely manner, indicating
that it was not delayed and that it was not copied and
sent again later at an inappropriate time. Note: The
authentication passphrase maps to a user's SNMPv3
password.
privacy of the data (by means of encryption) that a
Network Management System (NMS) is sending to this
device or receiving from this device through SNMPv3.
Note: The privacy passphrase maps to a user's password.
The Tripp Lite implementation of SNMPv3 supports
only MD5 authentication.
The Tripp Lite implementation of SNMPv3 supports only
DES as the protocol for encrypting and decrypting data.
18
4/23/2013 4:01:51 PM