Operating Conditions; Tools For Window Kit Installation; Features And Components - Danby Designer DPA100D1MDD Manual Del Usuario

IMPORTANT SAFETY INFORMATION
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
OPERATING
CONDITIONS
The air conditioner must be operated within the temperature ranges indicated below:
MODE
COOL
DRY
*HEAT (heat pump type)
*HEAT (electrical or heat pump)
(*) Optional feature, some models may not have this feature.
Note: Performance may be reduced outside of these operating temperatures.
TOOLS FOR WINDOW
KIT INSTALLATION
1. Screwdriver (medium size, Phillips)
2. Tape measure or ruler
3. Knife or scissors
4. Saw (In the event that the window kit needs to be cut down in size because the window is too narrow for direct
installation). See www.danby.com for general instruction guide.
1. Caster
2. Handle (L)
3. Control Panel
4. Wind louver
5. Air inlet grille
6. Air inlet
7. Remote control
8. Exhaust outlet
9. Handle (R)
10. Exhaust pipe assembly
11. Window sealing plate
assembly
ROOM TEMPERATURE
17°C (62°F) - 35°C (95°F)
13°C (55°F) - 35°C (95°F)
5°C (41°F) - 30°C (86°F)
<30°C (86°F)

FEATURES AND COMPONENTS

11
3