Product Information - Acer Z301C Manual De Instrucciones

2. Using the Navi/OK button, select OSD from the OSD. Then navigate to the setting you wish to change.
3. Use the Navi/OK button to adjust any sliding scales.
4. Language: Set the OSD menu language.
5. OSD timeout: Adjust the delay before turning off the OSD menu.
6. Transparency: Select the transparency when using gaming mode. The transparency can be 0% (OFF), 20%, 40%, 60%, or 80%.
7. Refresh rate num: Display the panel's current refresh rate on the screen.
System
1. This menu can be used to select the screen menu language and other important settings.
2. Press the MENU key to open the OSD.
3. Using the Navi/OK button, select System from the OSD. Then navigate to the setting yo wish to adjust.
4. Use the Navi/OK button to select the setting.
5. Input: Select the source from DisplayPort or HDMI.
6. Hot Key Assignment: Select the function of Hot Key 1 or Hot Key 2.
7. Wide mode: You can select which screen aspect you are using. The options are Aspect and 1:1.
8. Deep Sleep: When Deep Sleep function is On, the monitor shuts down its core functions and goes into energy saving mode if
the monitor is idle for a certain period of time, or if the user turns off the monitor DC power.
NOTE: Pressing any button (except the Power button) on the monitor may also wake up the monitor after
it goes into deep sleep.
9. Quick Start Mode: Enable monitor rapidly.
10. Power LED: You can set the power LED indicator to glow, go dimmer, or go off.
11. Power-off USB charge: Turn On or Off.

Product information

1. From any function page, press the
2. Reset All Settings: Reset all settings to the factory defaults.
key to open the OSD.