Página 1
M3 x 25mm M6 x 10mm Herramientas necesarias Español Para acceder a la última versión de la Guía de instalación para el usuario, ingrese a www.ergotron.com English, Español, Français, Deutsch, Nederlands, Italiano, Svenska, 日本語, 汉语 www.ergotron.com | USA: 1-800-888-8458 Europe: +31 (0)33-45 45 600 China: 400-120-3051 Japan: japansupport@ergotron.com...
Página 2
Attach to Rear of Cart 180˚ M5 x 10mm 2 of 6 888-97-392-G-00 rev. C • 08/19...
Página 3
Attach to Rear of Cart Leave 20" (508 mm) of cable slack to allow cart to raise and lower through its full range of motion. END OF INSTALLATION 3 of 6 888-97-392-G-00 rev. C • 08/19...
Página 4
(Only for carts with no drawers) (Only for carts with no drawers) M6 x 10mm Attach the Travel Stop bracket to the lift engine to keep SV DC Power System from hitting the base. M3 x 25mm Route cables with wrap and ties.
Página 5
Attach to Front of Cart Attach to Front of Cart Attach to Front of Cart (Only for carts with no drawers) (Only for carts with no drawers) (Only for carts with no drawers) Etapa de ajuste Adjustment Step Adjustment Step Es importante ajustar este producto conforme al peso del equipo montado, según se describe en los pasos siguientes.