Phocos MPPT Manual De Instrucciones página 15

System Voltage
The MPPT adjusts itself automatically to 12V or 24V system voltage.
As soon as the voltage at the time of start-up exceeds 18.0V, the MPPT implies that it is a 24V
system.
Display Functions
The MPPT is equipped with 3 LEDs.
LED1 (Green):
LED2 (Yellow):
LED3 (Red):
Setting up your MPPT
The MPPT comes with an 8 pole DIP-switch, which can be used to set up your MPPT.
With DIP No. 8, operation as component within a Modular System in conjunction with a MCU or
operation as standalone unit can be chosen.
With DIP No.8, In setting "+" (for the Modular System), DIP 1 to 4 have to be used to set the Modular
Address from "0" to "15". Each MPPT100/30 that is connected to the system must then have it's
own address.
ON-Day (charging)
OFF-Night (no charging)
ON- MPPT is on
OFF- MPPT is off
ON-Failure
OFF-Normal operation
13
LED2
LED1
LED3
+
-