Important Safety Instructions - Kicker iKICK iK501 Manual Del Usuario

Figure 2
Figure 3
Composite
Video Output
IMPORTANTSAFETYINSTRUCTIONS
Read and follow all the instructions listed in this manual. Follow all safety and procedural recommendations to prevent
damage to your self, your Kicker product, or your portable entertainment device.
The iK501 should not be used near water or in an environment where exposure to liquids is possible. This includes but is
not exclusive to areas where splashing, dripping, leaks, spills, and exposure to rain can occur. Liquid containers should
not be placed on or near the iK501 Stereo System. The iK501 Stereo System should not be cleaned with liquid cleaners.
Use only a dry cloth to clean the iK501. Only use the iK501 in areas with adequate open ventilation allowing at least 4"
of space on all sides of the iK501. Do not set the iK501 on any surface or cover the iK501 with any object that could
impede the airfl ow to and from the iK501 Stereo System. The iK501 should not be placed near any source of heat. This
includes but is not limited to stoves, radiators, heating elements, electronic heat sources, and areas where excessive
solar heat can be generated. Do not install the iK501 near any fl ame or place any fl ammable objects near the device.
The power outlet used to provide power to the iK501 should be accessible at all times. The polarized 2-prong electrical
plug has a wide blade and narrow blade that should fi t into the corresponding wide and narrow receiving connections
of your electrical outlet. Do not force the plug into the outlet. If the plug provided with the unit does not fi t, consult with
an electrician to upgrade the electrical outlet accordingly. The power cord should be situated in a way that protects it
from being pinched, walked on, tripped over, or accidentally pulled from the electrical outlet or the electrical input on the
iK501. Do not run the cable through doorways or underneath objects that could damage the wire or tear the insulating
material surrounding the wire. Only use the manufacturer supplied power supply with the iK501. We recommend using a
surge protector/power conditioner and unplugging the iK501 during any electrical storms or situations that could cause
voltage fl uctuations in the electrical system.
2009 iK501 Multilingual d01.indd 3 2009 iK501 Multilingual d01.indd 3
LCD Display
Rotary Control
Vibration
Docking Bay
Skid-Resistant, Non-Marking Feet
Transport Handle
Stereo RCA
Outputs
5" (127mm) Full-
Range Drivers
Isolation
Pad
IR Remote Receiver.
Passive
Square
Radiator
DC Power
22 Volts
3/4" (20mm) Silk
Dome Tweeters
1/8" Stereo
Auxiliary Input
4/23/2009 11:50:13 AM 4/23/2009 11:50:13 AM
3