Motor Overload Protector; Lint Filter - Alliance Laundry Systems SWD439C Guía De Uso Y Cuidado

Use and Care

Motor Overload Protector

The dryer's motor overload protector stops the motor
automatically in the event of an overload. After
cooling, the overload protector will reset itself. Dryer
can be restarted by pushing the timer knob in. If
overload protector cycles again, remove the dryer from
use and call the service person to correct the problem.
22 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Lint Filter

The lint filter is located at the front of the dryer in the
lower part of the door opening.
CLEAN THE LINT FILTER BEFORE DRYING
EACH LOAD. Remove lint filter cover, clean lint filter
and replace cover. Annually remove lint filter and
screw to vacuum the duct under it.
1 Lint Filter
Figure 7
1
SWD547N
SWD547N
800938