TP-Link MR200 Guía De Instalación Rápida página 9

• Check the LAN connection:
Enter http://tplinkmodem.net
appear, refer to FAQ > Q1 and then try again.
• Check your ISP parameters:
1 Open a web browser and log in to the web management page.
2 Verify the parameters provided by your ISP are correctly entered. If the parameters are incorrect, create a new profile
with the correct parameters.
• Check the PIN settings:
1 Open a web browser and log in to the web management page.
2 Verify if PIN is required. If it is, enter the correct PIN provided by your ISP.
• Check the Data Limit:
1 Open a web browser and log in to the web management page.
2 Verify if the total used data exceeds the total allowance . If it does, correct the total allowance and set the total used
data to 0, or disable the data limit .
• Check the Mobile Data:
1 Open a web browser and log in to the web management page.
2 Enable the mobile data to access the Internet.
• Check the Data Roaming:
1 Confirm with your ISP if you are in a roaming service area. If you are, open a web browser and log into the web
management page.
2 Enable the data roaming to access the Internet.
or 192.168.1.1 in the address bar of a web browser. If the login page does not
English
7