Thermal Protector - Hoover PLATINUM COLLECTION CYCLONIC BAGLESS CANISTER El Manual Del Propietario

• Always turn off this appliance before connecting or discon-
necting either hose or motorized nozzle.
• Hold plug when rewinding onto cord reel. Do not allow plug
to whip when rewinding.
• Do not pick up anything that is burning or smoking, such as
cigarettes, matches, or hot ashes.
• Do not use without Dirt Cup and / or Filters in place.
• Unplug before connecting Turbine Hand Tool.
• The use of an extension cord is not recommended.
• Do not point tools toward people or pets.
• Do not operate cleaner in bare feet or when wearing open
toe shoes or sandals.
SAVE THESE INSTRUCTIONS
WARNING:
To reduce the risk of electric shock, this
appliance has a polarized plug (one blade is wider than the other).
This plug will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper outlet. Do not change the
plug in any way.

THERMAL PROTECTOR:

An internal thermal protector has been
designed into your cleaner to protect it from overheating.
When the thermal protector activates, the cleaner will stop running. If
this happens, proceed as follows:
1. Turn the cleaner OFF and disconnect it from the electrical outlet.
2. Check Primary Filter, HEPA Filter, and Umbrella Tube for dirt
accumulation.
3. Refer to "Troubleshooting" section.
4. When cleaner is unplugged and the motor cools for 30 minutes, the
thermal protector automatically resets and cleaning may continue.
If the thermal protector continues to activate after following the above
steps, your cleaner may need servicing (see "Service" section).