Troubleshooting - KitchenAid KSM1FPA Manual De Instrucciones

TROUBLESHOOTING

Food Pr_ocessor_ attachment doesn't r_un
Food Pr_ocessor_ attachment not shr_edding or_ slicing pr_oper_ly
• Make sure the raised-blade side of
the disc is positioned face up on the
common adapter.
• If using the adjustable slicing blade,
make sure it is set to the correct
thickness.
Lid won't close when using a disc
• Make sure the disc is installed correctly, and
is positioned properly on the disc adapter.
If the problem is not due to the above item,
see the "Warranty and Service" section.
Clutch engages
If the clutch activates, there will be a very loud clicking noise.
1. Check to make sure there are not too
many items in the Food Processor
attachment.
Stand Mixer_ motor_ slows down
This is normal operation and is not damaging to the performance of the attachment.
22
• Check to see whether the Stand Mixer
is plugged into a grounded 3 prong outlet.
If it is, check the fuse or circuit breaker
on the electrical circuit the Stand Mixer
is connected to and make sure the circuit
is closed.
• Is the fuse in the circuit to the Stand Mixer
in working order? If you have a circuit
breaker box, be sure the circuit is closed.
• Unplug the Stand Mixer, then plug it back
into the outlet.
• Check to make sure the Food Processor
attachment was assembled correctly, and
the interlock lid is properly aligned and
locked in place.
• Make sure ingredients are suitable
for slicing or shredding. See "Tips for
Great Results" section.
Do not return the Food Processor attachment
to the retailer. Retailers do not provide
service.
2. Make sure any hard seeds are removed.