Televes KIT 800 Manual Del Usuario página 16

Digital
Multi-Satellite Kit
3.- MOUNTING THE LNB
Place the LNB on the dish's support, by following these instructions carefully:
It should be secured by the feedhorn
that corresponds to the Hotbird satelli-
te.
This feedhorn is indicated on the LNB
label.
4.- CONNECTIONS
Carry out all the connections as indicated on the diagram:
- Connect the LNB output to the receiver's input using the coaxial cable.
- Connect the TV output of the receiver to the AV input of the TV with a SCART connector.
- Connect the receiver and the TV to the mains.
- Switch the receiver on and select programme 1: 2M Maroc.
Place the converter on the support, but
as far from the dish as possible. Use
the adapter accessory to do this.
16
KIT 800
Turn the LNB clockwise, until the out-
put connector is at the 8:00 o'clock
position.