Attaching The Microfiber Pad; Filling Solution Tank - Hoover Enhanced Clean El Manual Del Propietario

Ocultar thumbs Ver también para Enhanced Clean:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

attaChinG the MiCroFiber Pads
WARNING
!
To reduce the risk of personal injury, unplug the
steamer when assembling the accessories.
IMPORTANT
Never use the Steam Mop without the Microfiber
pad correctly attached to the floor head.
for disinfecting
For optimal disinfecting benefits, use the
"Hard Floor Microfiber Pad," which contains
the cut outs in it (2.6).
Place the "Hard Floor
the floor (white side up).
Place the product on top of the pad making
sure the mop head covers the entire pad
(2.6). Hook and loop feature on the bottom
of the mop head will hold the pad in place.

FillinG solution tank

WARNING
!
To reduce the risk of personal injury, unplug the
steamer when filling the steamer.
Remove the solution tank from the BACK of
the steam cleaner (2.8)
Twist the cap counter-clockwise to remove (2.9)
DO NOT MIX
HOOVER
DISINFECTANT
PURPOSE CLEANER WITH ANY OTHER
CLEANING SOLUTION.
Fill the tank with 300ml of recommended
®
Hoover
Multi-Purpose Disinfectant or Hoover
Multi-Purpose Cleaner. Using the measuring
cup provided, fill twice to the 150ml mark
indicated and pour solution into tank. Replace
cap and twist clockwise (2.10) until tightly
secure.
Slide the
solution tank down and snap
into place (2.11).
You can now disinfect or clean on demand by
turning the Clean Control dial (2.12) to the
desired setting, which will automatically
dispense the disinfectant or cleaner when
pressing the trigger. Turn to the "off" position if
no Hoover
®
Mutli-Purpose Disinfectant or
Hoover
®
Multi-Purpose Cleaner is desired.
WARNING
!
Only use recommended Hoover
Purpose Disinfectant or Hoover
Purpose Cleaner.
!
Microfiber Pad" on
!
®
MULTI-PURPOSE
®
OR
HOOVER
MULTI-
!
®
Multi-
®
Multi-
2.6
for general cleaning
Use the "Multi-Surface Microfiber Pad" (2.7).
Place the "
Multi-Surface Microfiber Pad" on
the floor (white side up).
Place the product on top of the pad making
sure the mop head covers the entire pad
(2.7). Hook and loop feature on the bottom
of the mop head will hold the pad in place.
2.8
2.10
®
2.12
8
2.7
2.9
2.11

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido