Input Guitar - Trevi XF 800 Guia Del Usuario

ENGLISH
2. Turn on the microphone using the switch on the handle of the microphone to the ON position.
3. Adjust the volume of the microphone input(16) and the echo effect(15) as desired using the appropriate commands.
Note:
- You can use two microphones simultaneously (second microphone not included).

INPUT GUITAR

This device can amplify a guitar or other preamp music instrument.
1. Connect the cable of the guitar by inserting it into the MIC(11) input.
2. Adjust the volume of the microphone input(16)as desired using the appropriate command.
RECORDING
MUSIC RECORDING
This unit and 'capable of recording on USB memory the music from the radio feature or AUX-In function (it is NOT possible to record from the Bluetooth
or SD functions). The device will automatically create a folder called "Record" inside the USB memory and it will store all log files.
1. Turn on the unit.
2. Insert a USB memory into the USB/SD(10).
3. Select the function AUX-In or Radio function by MODE button(8) on the unit, or the MODE(25) on the remote control.
4. Press REC button(7) on the unit or the RECORD button(26) on the remote control to start recording, the display(9) will show "REC" and time
signature will start.
5. Press REC button(7) on the unit, or the RECORD button(26) on the remote control to stop recording. The device will automatically go into USB
function to immediately playback the recorded file. After playing the unit will report on the initial function (Radio or AUX-In).
Note:
- You can record only the audio functions from Radio or AUX-In. Even inserting and using the supplied microphone, the unit will record only the audio
signal transmitted from these sources, it will not record the vocals done with the microphone.
- When you turn on the "Registration" all the controls of the unit are inhibited including volume adjustment, they will take their normal function when
the recording will stop.
VOICE RECORDING
This unit and 'capable of recording the vocals on the USB memory when using the supplied microphone. The device will automatically create a folder
called "Record" inside the USB memory and it will store all log files.
1. Turn on the unit.
2. Insert a USB memory into the USB/SD(10).
3. Select the USB or SD functon by MODE button(8) on the unit, or the MODE button(25) on the remote control.
4. Press REC button(7) on the unit or the RECORD button(26) on the remote control to start recording, the display (9) will show "REC" and the time
signature will start.
5. Press REC button(7) on the unit, or the RECORD button(26) on the remote control to stop recording. The unit will play, automatically, the recorded
file.
Note:
- You can record only the voice.
INFORMATION NOTE ON THE REMOVAL AND DISPOSAL OF BATTERIES
Warning: Only high-qualified personnel should perform this operation!
BATTERY REMOVAL
The appliance should not be plugged to the mains socket when performing this operation!
1. Remove the screws that secure the structure of the trolley and take it apart.
2. Remove the screws that secure the rear panel speaker amplified and remove the panel;
3. Locate the battery;
4. Remove the screws that secure the supports of the battery, remove the supports, disconnect the battery and remove it.
Used batteries should not be disposed of with household waste or thrown into fire or water. Used batteries should be recycled or disposed of in
separate waste collection centres.
SPECIFICATIONS
Power Supply:
Consumption:
Maximum output power:
Sound Bar Dimensions:
Weight:
....................................DC 15V, 2A - internal lead acid rechargeable battery 12V 4.5A
.................................................................................................... 30W
............................................................................................. Max 50W
................................................................................ 270x260x500mm
..................................................................................................5,5 kg
9
XF 800