Key Parts And Components - INBair O2-100 Guía De Usuario E Instrucciones

Key Parts and Components

1
2
3
4
Operation Instructions
1. Place the headset around the neck and gently direct the flexible mouthpiece
towards the mouth and nose.
2. Connect one end of the silicone hose to the oxygen inlet on the headset.
3. Remove the silicone cap from the oxygen outlet on the main body and store
in a safe place.
4. Connect the other end of the silicone hose to the oxygen outlet on the main
body.
5. Connect the power supply to the back of the product and plug into power
socket.
6. Begin the flow of oxygen by gently pressing the power button.
7. After 30 minutes operation time the unit will automatically switch off. Unplug
the power and replace the silicone outlet cap to prevent damage.
6
9 8
7
6
5
1. Silicone Gel
2. Vacuum Pump
3. Headset Connection (Oxy-
gen Outlet)
4. Power Switch
5. PCB / LED
6. Zeolite Filter
7. Solenoid Valve
8. DC Power Out
9. Internal Air Filter