9 Removing and Fitting the Battery
1
2
► Depress lock button (1) and hold it in that posi‐
tion.
► Pull or push the control handle (2) to the
required position.
► Release the lock button (1).
► Move the control handle (2) back and forth
until it engages.
8.2
Adjusting the Loop Handle
The loop handle can be set in different positions
to suit the height and reach of the user.
► Switch off the trimmer and remove the battery.
► Loosen the star knob nut (1).
► Swing the loop handle (2) to the required posi‐
tion.
► Tighten down the star knob nut (1) firmly.
9
Removing and Fitting the
Battery
9.1
Fitting the Battery
2
1
► Insert the battery (1) in the battery compart‐
ment (2) and press it home until you hear a
click.
0458-806-9821-B.VA0.M20.
2
1
3
Arrows (3) on battery (1) are still visible and
battery (1) is held securely in battery compart‐
ment (2). There is no electrical contact
between the trimmer and battery (1).
► Push the battery (1) into the battery compart‐
ment (2) as far as stop.
The battery (1) engages with a second click
and is flush with the trimmer's housing.
9.2
Removing the Battery
► Stand the trimmer on a level surface.
► Hold one hand in front of the battery compart‐
ment to ensure the battery does not fall out.
2
► Press the locking lever (1) with your other
hand.
The battery (2) is unlocked and can be
removed.
10 Switching the Trimmer
On/Off
10.1
Switching On
► Hold the trimmer firmly with one hand on the
control handle – wrap your thumb around the
handle.
► Hold the trimmer firmly with the other hand on
the loop handle – wrap your thumb around the
handle.
► Push the release slide (1) in the direction of
the loop handle with your thumb and hold it
there.
► Depress the trigger lockout (2) with your hand
and hold it there.
You can let go of the release slide (1).
English
1
1
2
3
33