Power Led; Signal Led - Marmitek HDTV Anywhere Modo De Empleo

5. USE
5.1 The HDTV transmitter and receiver
1. POWER button: switches the HDTV transmitter/receiver ON or OFF
2. SOURCE button: switches between two connected HD devices

3. POWER LED

Green: HDTV transmitter/receiver is ON
Red: HDTV transmitter/receiver is in STANDBY mode
Off: HDTV transmitter/receiver is OFF

4. SIGNAL LED

Green: perfect connection between HDTV transmitter and receiver
Blinking green: adequate connection between HDTV transmitter and
receiver
Off: No connection between HDTV transmitter and receiver
5. SOURCE LED
Green: indicates which HDMI input has been selected
5.2 The HDTV remote control
1. Insert the two supplied AAA batteries into the remote control.
2. STANDBY
STANDBY mode or ON
3. SOURCE button: selects the desired HD device
8
5
button: switches
4 3
the HDTV
2 1
transmitter/receiver
© MARMITEK
to