Chauvet Well Quad-M Guía De Referencia Rápida página 5

EN
Product Pairing
Mounting
Product
Mounting
Diagram
Product Already Paired
·
If the WELL™ Quad-M product has already been paired with the
W-DMX™ transmitter, the red LED on the On/Off switch will flash
slowly.
·
In this case, the WELL™ Quad-M product is ready to work in wireless
mode.
Pairing the WELL™ Quad-M Product and a new W-DMX™ Transmitter
1.
From the WELL™ Quad-M's control panel, go to WDMX > REST.
2. Select YES (the red LED on the On/Off switch will illuminate solid).
3.
From the W-DMX™ transmitter, press <RESET> (the SIGNAL
indicator will flash).
4. Once the transmitter has found the WELL™ Quad-M product, the
SIGNAL indicator on the W-DMX™ transmitter will illuminate solid.
5.
The red LED on the On/Off switch will flash slowly indicating the
presence of DMX signal.
Correct Floor Mounting
5
WELL™ Quad-M QRG