Behringer TUBE ULTRAGAIN MIC500USB Guia De Inicio Rapido página 20

38
TUBE ULTRAGAIN MIC500USB
Specifications
Input
Type
Input impedance
Maximum input level
Phantom power
Output
Type
Output impedance
Maximum output level
Controls
Gain
Output
Preamp mode control
1 x XLR (mic)
1 x ¼" TRS (line)
1 x ¼" TRS (Hi-Z)
2 channels from USB
Mic in: 3 kΩ balanced / 1.5 kΩ unbalanced
Instrument in: 800 kΩ
Mic: +1 dBu / line: +22 dBu
Hi-Z: +12 dBu with pad
+48 V switchable, mic input
1 x ¼" TRS, direct output
1 x ¼" TRS stereo, headphone output
2 channels to USB
Direct out: 480 Ω balanced, 240 Ω unbalanced
Headphone out: 24 Ω min
+22 dBu direct output
+22 dBu headphone output
Variable (+26 dB to +60 dB)
Variable (-∞ to +20 dB)
Selection of various preamp models for
microphone and instruments
Switches
20 dB Pad
+48 V
Low cut
Phase reverse
Direct monitor
Indicators
Input level LEDs
System Data
Signal-to-noise ratio
Frequency response
(headphones out, direct
monitor)
Computer Bus Connectivity
Type
Resolution / Max. Sample Rate
Quick Start Guide
Level attenuation (20 dB)
+48 V phantom power
High-pass filter (cut-off frequency 90 Hz)
Phase reverse (180°)
Headphone mono mix of Mic/Hi-Z preamp out
and Line in
-24, -18, -12, -6, 0, +6, +12, clip (dB)
90 dB, A-weighted @ -20 dBu input level
10 Hz – 71 kHz (+0/-3 dB) (mic input)
10 Hz – 71 kHz (+0/-3 dB) (Hi-Z input)
10 Hz - 65 kHz (+0/-3 dB) (line input)
USB 2.0, type B
16-bit / 48 kHz
39