Honeywell TURBO FORCE Serie Manual Del Usario página 2

INTRODUCTION
The Super Turbo ™ High Performance Fans were
aerodynamically designed to give you the versatility of
changing this fan's angular direction simply by adjusting
the fan up or down (Fig.1a & 1b). Upon using this fan, you
will feel the strong and powerful air stream that will quickly
move air in order to cool an area rapidly and efficiently.
HT-380 SERIES OPERATION
Be sure the fan is in the OFF position.
• Place your fan on a dry, level surface.
• Plug the power cord into a polarized 120 volt AC wall outlet.
• To operate your Turbo Fan, press the control button once to turn the fan on in high speed (III), press a
second time to change to medium speed (II), press a third time to change fan to the low speed (I),
press a fourth time to turn the fan off (Fig. 2a & 2b).
• Adjust the fan to the desired position (Fig. 3).
• To move the fan, turn the fan OFF and pick it up by the handle (Fig. 4).
Fig. 2a
HT-8800 SERIES OPERATION
• Place your fan on a dry, level surface.
• Plug the power cord into a polarized 120 volt AC wall outlet.
• Each fan is independently operated. To operate the fans, turn the control knob to the desired fan speed:
High (III), Medium (II), or Low (I) (Fig. 5).
• Adjust the fans to the desired position (Fig. 6).
NOTE: The lower fan is equipped with a quieter motor.
• To move the fan, turn the fan OFF (O) and pick it up by the reach through handle (Fig. 7).
Fig. 5
High
Medium
Low
Fig. 2b
Fig. 6
Fig. 1a
Fig. 3
Fig. 7
Fig. 1b
Fig. 4