Intended Use; Supplied Items - Powerfix Profi PDM 300 B1 Manual De Instrucciones

POWERFIX PDM 300 B1
Congratulations!
By purchasing the POWERFIX digital multimeter PDM 300 B1, hereinafter referred to as multimeter, you
have opted for a high-quality product.
Familiarise yourself with the multimeter before using it for the first time, and read these operating
instructions carefully. Pay particular attention to the safety instructions and use the multimeter only as
described in these operating instructions and for the specified range of applications.
Keep these operating instructions in a safe place. Include all documents when passing on the multimeter
to someone else.

1. Intended use

The multimeter is used to measure AC/DC voltages and AC/DC currents. The multimeter also has a
resistance measurement, a diode test, a function generator and a continuity test. This multimeter is not
designed for commercial use or installation and operation in a company. This multimeter may only be
used for private purposes, and any other use is not as intended. This multimeter meets all relevant norms
and standards in conjunction with CE conformity. In the event of any modification to the multimeter that
was not approved by the manufacturer, compliance with these standards is no longer guaranteed. The
manufacturer does not accept any liability for any resulting damage or faults in such cases.
Please observe the regulations and laws in the country of use.

2. Supplied items

 Multimeter
 2 test probes (including test lead)
 Standard 9V battery
 1 screwdriver
 These operating instructions
These operating instructions have a fold-out cover. The multimeter is illustrated with a numbering system
on the inside of the cover. The numbers indicate the following:
1 Display
2 HOLD button (Save button)
3 Range selector switch
4 COM jack (earth)
5 Ω V mA jack (Ω = ohm, V = volt, mA = milliampere,
6 Test probes (including test lead)
7 10A jack
8 On/off button
50 - English
= square wave signal)