About Your Refrigerator; Instruction Manual - Thetford NORCOLD Serie Manual De Instrucciones

0
GB
Instructions for use
FOREWORD
1 INTRODUCTION
This user's manual is for all N80, N90, N100, N110, N112 and N145 models of
Thetford absorber refrigerators. It explains how to use your refrigerator correctly
and safely. Read the manual carefully before using the refrigerator for the first time
to obtain a quick overview of how to operate and use the refrigerator.
Thetford absorber refrigerators are specially designed to store fresh and frozen food
and make ice cubes in caravans and campers. The control panel allows you to select
the preferred energy source. Different energy sources allow you to use your refrigerator
under different conditions.
There are numbers in the text that refer to illustrations. These illustrations are printed
in a fold-out at the beginning of this manual.
Thetford absorber refrigerators belong to category C11: gas appliances that must
be installed so that they are isolated from the living space.
To find out more about how your absorber refrigerator works, visit our website at
www.thetford-europe.com.
2 PRECAUTIONS AND SAFETY INSTRUCTIONS
2.1 Alerts
The following alerts are used in this user's manual:
Warning! "Warning" alerts the user to the danger of damage to the product or to the
user if the user fails to carry out the described procedures carefully. Non-observance
of the procedures may result in serious injury to the user or damage to the product.
Caution! "Caution" alerts the user to the possibility of damage to the product if the
user fails to carry out the described procedures carefully.
GB
Important! "Important" denotes supplementary information for the user and alerts
the user to potential problems.
2.2 Warnings
- This refrigerator must be installed according to the manufacturer's instructions
and in compliance with local and national regulations.
- Read this manual carefully before you start to use your refrigerator.
- Always consult the warnings before you perform any maintenance or gas checks.
2.2.1 Repairs / maintenance
- Never open or damage the cooling system. The cooling system is pressurized
and contains substances harmful to health.
- Never attempt to repair gas, extractor or electrical parts yourself. They must be
repaired by a qualified service engineer. Contact the Customer Service
department of Thetford for a list of qualified parties.
- Always switch off the refrigerator before you perform any kind of maintenance or
cleaning.
2.2.2 Use
- Never cover the ventilation grills in the walls of a caravan. Good ventilation is
essential for the correct working of the absorber system.
- Water in the ventilation grating can result in damage to the refrigerator.
Therefore, we advise that you put the winter cover over the ventilation gratings
prior to washing your vehicle.
- Never expose the refrigerator to rain.
- Never operate the refrigerator by gas while driving. If a road accident results in
fire, there is a risk of explosion.
2.2.3 What to do if...
You smell gas:
- close the valve of the gas bottle;
- extinguish any naked flames;
- do not switch on any electrical devices or lighting;
- open the windows and leave the room;
- contact the Customer Service department of Thetford.
You suspect a leak in the cooling system:
- switch off the refrigerator;
- extinguish any naked flames;
- provide sufficient ventilation;
- contact the Customer Service department of Thetford.

3 ABOUT YOUR REFRIGERATOR

Your refrigerator has a cold space and a freezer compartment. After starting up the
refrigerator, allow it to cool for at least eight hours before placing any food in it.
3.1 Cold space
The cooling fins are located on the inside of your refrigerator. The absorber system
uses the cooling fins to draw off heat from the refrigerator. Therefore, never place
plastic or paper over the cooling fins. Air must be able to circulate freely through
the refrigerator so that heat can be extracted.
Important! Do not cover the cooling fins at the back of the refrigerator with plastic
or paper. The refrigerator cools optimally when air is allowed to move freely
through the refrigerator.
To limit frosting on the cooling fins:
- always cover liquid foods before placing them in the refrigerator;
- always let hot food cool before placing it in the refrigerator;
- never keep the refrigerator open longer than necessary.
3.1.1 Fitting racks
Inside your refrigerator there are two or three storage racks. You can adjust the
racks to a convenient height by means of a simple click system:
- click the plastic bracket to the right short side of the rack;
- turn the bracket into the horizontal position and insert the rack tipped in a
sloping position into the refrigerator;
- place the short side without bracket into one of the grooves on the left wall of
the refrigerator;
- place the short side with bracket in the corresponding groove on the right wall of
the refrigerator;
- turn the bracket downwards to fix it into the groove.
To move a rack, turn the bracket upwards and remove the rack. Place the rack at
the required height in the way described above.
3.1.2 Securing products for driving
The fitting racks in your refrigerator have a system for you to secure products while
driving. The system consists of a simple click-and-slide plastic strip. To secure
products on the rack while driving, push the plastic strip as tightly as you can
against the products on the rack.
In the storage space on the inside of the refrigerator door, there is the unique
Thetford flexible bottle slide (see illustration 1). The slide prevents bottles from
sliding around during driving. Push the slide against the products in the door or
place the products between the bottle slide.
- 2 -
3.2 Freezer compartment
The freezer compartments of the N80, N90 and N112 reach a temperature of -12° C*
and are therefore suitable for making ice cubes and for storing frozen foods for a
short time. The freezer compartments of the N100, N110 and N145 reach a
temperature of -18° C* and are therefore suitable for making ice cubes and for
storing frozen foods for a longer period of time.
* Tested at an ambient temperature of +25° C at 230 V.
Important! - The freezer compartment is unsuitable as a means of freezing food.
- Use only drinking water to make ice cubes.
- Do not place any other products in the freezer compartment when you are
making ice cubes.
- Water freezes fastest with the thermostat at the highest setting.
Tip! - Make ice cubes at night when your refrigerator has more spare capacity.
3.3 Automatic defrosting cycle (N100A and N145A)
The refrigerators that work on the SES system (N100A and N145A) are equipped
with an automatic defrosting cycle. At the end of each 49 hours of refrigerator
operation, the system checks the temperature of the cooling fins at the rear of the
refrigerator. If the temperature is too low, the system activates the defrosting cycle:
the system switches off the refrigeration, until the rear cooling element has reached
the correct temperature again. After this, the timer is set at 49 hours once again
and the system resumes normal operation. Each time the refrigerator is switched on
or off, the timer is automatically reset to 49 hours.
Note! Regular manual defrosting is not necessary with refrigerators that work on
the SES system (N100A and N145A). The automatic defrosting cycle ensures that
there is no (or almost no) ice build-up on the cooling element at the rear of the
refrigerator.
3.4 Door locking mechanism
The refrigerator door has an automatic locking mechanism. The door locks
automatically when you press it shut firmly. The lock releases unnoticed when you
open the refrigerator with your hand. This automatic locking mechanism also keeps
the refrigerator door shut during driving. For some models an additional security
device is fitted below the refrigerator. By pushing the locking bar over the pin when
the door is closed, you can make doubly sure that the door does not come open
during your journey.
If you are not going to use the refrigerator for a prolonged period of time, you can
use the special hook of the door locking mechanism (see illustration 2) to prevent
odours. Rotate the hook through 90 degrees and lock it in place using the pin.
4 SWITCHING ON THE REFRIGERATOR (N80, N90,
N100P, N100E, N110, N112 AND N145E)
- It is recommendable to clean the inside of the refrigerator before you switch it on.
- Let the refrigerator cool for at least eight hours before you place food in it for the
first time.
- The freezer compartment should be cold one hour after switching on the
refrigerator.
4.1 Igniting and starting your refrigerator
Manual ignition (N80P, N90P, N100P, N110P and N112P)
ILLUSTRATION 3