RS Pro CT2670 Manual De Instrucciones página 10

Specifications:
Name Cable Tester with Probe
Display LCD Module (64 mm x 33 mm)
Connector type RJ45, RJ12 ( RJ11 ) & F connector
(1) LAN . (2) TEL . (3) COAX . (4) TONE . (5) LENGTH .(6) TEST .
Button
(7) POWER . (8) ▲. (9) ▼. (10) ◄. (11) ►. (12) MEMORY. (13) SETUP.
Cable type Shielded or unshielded, CAT -5, CAT-6, CAT-7
Error status Open circuit, short circuit, cross circuit and split pairs
Measures cable length via TDR
Measure types Checks and verifies wire map
Generates two different tracing tones to help identify users
Cable length Accuracy of the length measurement is ± 5 % length: 1~350 meter
& accuracy (3~1200 feet)
Minimum
cable length
1 meter (3 feet)
for testing of
split pairs
9 Volt battery
Power source
Detects a low battery condition.
Turns off
Auto-off in any mode and low power consumption for long battery life
automatically
Input
Protection against excess voltage, transients ringer signal
protection
Physical
195 mm (L) , 90 mm (W) , 40 mm (H)
Dimension
Operating Temperature: 0° to 50° C ( 32° to 122° F )
Environmental
Storage Temperature: -10° to 60° C (14° to 140° F ) Humidity: 10 %
to 90 % non-condensing
F to BNC Adapter * 2 pcs, 9 Volt battery * 2 pcs, RJ45/RJ11 Adapter
Accessories
Belt Clip * 1pcs, BAG * 1pcs
Cable Tester with Probe / English
EN- 9