Aleratec 1:1 HDD Copy Dock USB3.0 Guia De Inicio Rapido página 6

Using the HDD Copy Dock
Using as a USB HDD Docking Station
1. Use the included power adapter and cord to plug the HDD Copy Dock into a power
outlet.
2. Connect the USB Type-A connector or to your computer's USB Port.
Note: The USB 3.0 Type-A connector is also compatible with USB 2.0 ports.
3. Connect the USB Type-B connector to the USB Port located on the back of the
HDD Copy Dock.
4. Insert 1 or 2 SATA Hard Disk Drives into the drive slots on the top of the HDD
Copy Dock. When inserting, align the SATA port on the Hard Drive with the SATA
connector in the drive bay slot.
5. Power on the HDD Copy Dock.
Note: Any unformatted Hard Disk Drive will not show up as a drive in the
Windows Operating System. You must format these drives using the operating
®
system's tools.
4 www.aleratec.com