General Instructions; Use Of Accessories - Imetec L1107 Instrucciones De Uso

all risks.
DO NOT obstruct the intake filter and always keep it
free from dust and hair.
DO NOT spray hairspray while the appliance is
switched on. There is a risk of fire.
Warning
Refer to page I of the Illustrative Guide to check the contents of the package.
All the figures are found on the inside pages of the cover.
1. Technical Data
2. Attachment eyelet
3. Adjustment keys
3A Air flow selection key
3B Air temperature selection key
3C Cold air shot button
4. Front grid
For the appliance features, refer to the external packaging.
Use only the supplied accessories.
The hair dryer is provided with the accessories described above.
The accessory is mounted on the appliance by pressing it onto the front part of the hair dryer
(4) until it is inserted. When finished using it, the accessory can be removed by pulling it firmly.
Styling nozzle (6A)
Use the styling nozzle to direct the air jet as you wish.
Revolution nozzle (6B)
Use new Revolution nozzle instead of styling nozzle to achieve fast drying and hair smooth to
the touch.
IMPORTANT: use only the original accessories of the appliance.
Refer to the figure in the illustrative guide of the instructions for use.
Appliance with separate keys for air flow (3A) and temperature (3B)
The two keys set air flow and temperature separately at the following levels:
Air flow button (3A)
0 = OFF
1 = medium air flow
2 = strong air flow
Cold air shot button (3C)
If the appliance is equipped with this button, it can be used to set the styling.
• If this button is pressed while the appliance is on, the hot air cools down and the set style
lasts longer.
• Once the button is released, the appliance returns to a hot air flow at the selected level.
Ioniser (7) (if present)
The appliance has an ionizer featuring ION technology. This function is automatically activated when the
appliance is switched on. The LED (7) indicates proper operation.
When the hair dryer is not used, unplug the appliance from the socket and store it in a dry and
dust-free place.
Do not wind the power cord around the appliance. Coil it up loosely without bending it.
IMPORTANT! Switch the appliance off and unplug it from the socket before
cleaning!
Make sure all cleaned parts are completely dry before reusing the appliance!
SYMBOLS
General prohibition

GENERAL INSTRUCTIONS

5. Intake filter
6. Accessories
7. Ionizer LED (where present)

USE OF ACCESSORIES

USE
Temperature button (3B)
1 = low temperature
2 = medium temperature
3 = high temperature
STORAGE
MAINTENANCE
6
Class II appliance
5A Filter mesh
5B Filter cap
6A Styling nozzle
6B Revolution nozzle