Playing A Record - lauson XN092 Manual De Instrucciones

LAUSON
DESCRIPTION
1. Dust cover
2. 45 RPM adapter
3. Tone arm lift-lever
4. Auto-stop switch control
5. Speed selection (33, 45, 78 rpm)
6. Cartridge
7. Power LED light
8. Power switch / Volume control
9. Aux out / Headphone
10. Louder Speakers-R&L (behind the
Speaker-cover)
11. DC power jack (5V 1000mA)
12. RCA lineout (R&L)
13. Aux in 3.5mm
14. USB Encoding connection
INITIAL SET-UP CONNECTION
Make sure that the mains voltage of your home corresponds to the operating voltage of the unit. Your unit is
ready to be connected to a mains voltage of 5V DC adaptor
AMPLIFIER CONNECTION (if required)
Whilst you can listen to your new turntable using the built in speakers you may wish to connect it to your
existing Hi Fi system. Connect the audio plugs to the Line input on your mixer or amplifier using an RCA cable
(not supplied)
•
Red plug into R/H channel input.
•
White plug into L/H channel input.

PLAYING A RECORD

•
Place the record of your choice on the turntable. If required, do not
forget to place the adaptor on the record spindle.
•
Choose the desired playing speed using the speed selection switch
between 33.3, 45 and 78rpm.
•
Turn on the Rotary Power Switch (this know also controls volume)
•
Release the tone arm lock.
• Raise the arm with your hand lightly.
•
Place the stylus vertically over the first track of the record, the
turntable will start turning automatically.
TURNTABLE
- 3
EN