Jotul F 118 Instrucciones Para Instalación página 6

ENGLISH
Table of contents
Relationship to the authorities
Product information of Jøtul F 118 ........................................ 7
General safety precautions ...................................................... 7
Measures to prevent fires ......................................................... 7
Installation of Jøtul F 118
Assembling the stove ................................................................. 7
Choose a flue exit position ....................................................... 7
Assembling of the flue .............................................................. 7
Operating instructions
Initial lighting .............................................................................. 8
Daily use ........................................................................................ 8
Maintenance
Cleaning the glass door ............................................................ 8
Ash removal .................................................................................. 8
Cleaning and soot removal ...................................................... 8
Cleaning the flue pipe to the chimney ................................. 9
Control of the stove ................................................................... 9
External maintenance ............................................................... 9
Wood length, quantity and quality ..................................... 9
Jøtuls definition of quality-wood ........................................ 9
Service
Changing the burn plates ......................................................... 9
Changing the baffle plate ......................................................... 9
6
Relationship to the
authorities in various
countries
Prior to starting on the installation the appropriate permits
must be obtained from the relevant local authorities.
Installation of a fireplace must be according to local codes
and regulations in each country. Your dealer has been
specially selected for his knowledge of your local codes
and may provide assistance in ensuring that your
installation is safe and legal.
Instructions for mounting, installation and use are enclosed
with the product. The installation may only be used when
it has been inspected and a certificate of completion has
been issued.
Warning! Please ensure that there is adequate ventilation
in the room in which the stove is to be installed.
An inadequate air supply could cause smoke gas to escape
into the room. This can lead to drowsiness, nausea and
sickness and is extremely dangerous.
Special attention must be paid to the following:
The chimney or flue system must comply with the Building
Regulations for heat producing appliances. It is important
to ensure that the chimney has the correct dimensions for
the stove and that the attachment to the chimney is sealed
and is functioning properly. Smoke gas entering enclosed
spaces may represent a serious health risk.
The chimney or flue must be sound and clean. If it has been
used with a wood, coal or other solid fuel fire, it must be
swept before the stove is installed.
Ensure that the chimney or flue is structurally sound. In
particular, it must not be possible for products of
combustion to come into contact with combustible
materials in the structure of the building.
In some situations it may be advisable to fit a flue liner
prior to the installation of the stove. Your installer will advise
if this is necessary.
The product data plate is located under the heat shield
and is made of heat-resistant material. The following
information is listed on the data plate: Manufacturer and
address, model number, manufacturing number, rated heat
output, registration number (after assignment), style, and
safety measurements.