Descargar Imprimir esta página

Helvex Maxima E-931 Guia De Instalacion página 4

Publicidad

Cambio del Cartucho / Cartridge Replacement
Cierre el suministro de agua antes de comenzar, desenrosque el
16
opresor del maneral con la llave allen (incluida) y retire el maneral.
Con ayuda de un desarmador plano delgado (no incluido) haga
palanca para retirar el chapetón plano y posteriormente retire el
chapetón esférico.
/
Close the water supply before unscrewing the
set screw with allen wrench (included) and remove the handle.
Using a small flat screwdriver (not included) remove the flat
escutcheon and subsequently the spherical escutcheon.
opresor
screw
chapetón esférico
spherical escutcheon
Posibles Causas y Soluciones / Troublesshooting
Problema
/ Problem
Las válvulas principales del agua se encuentran cerradas.
No sale agua.
/ No water flow.
Existe poco flujo de agua.
/ There is some water flow.
Las Válvulas angulares no estan totalmente abiertas.
La salida está floja.
/ The faucet is loose.
Hay fuga en las conexiones.
/ There are leaks in the
connections.
Participa en nuestros
cursos gratuitos
de capacitación.
Enter our free
training courses.
Recomendaciones de Limpieza / Cleaning Recommendations
Es muy importante seguir las siguientes instrucciones para conservar los
acabados de los productos HELVEX, con brillo y en perfecto estado:
1. Utilice únicamente agua y un paño limpio.
2. No utilice fibras, polvos, abrasivos, ni productos químicos.
3. No utilice objetos punzo-cortantes para limpiar los acabados.
4. Se recomienda realizar la limpieza de su producto diariamente.
Nota: Vea nuestros tips en la pag. www.helvex.com.mx
HELVEX, S. A. DE C. V. Calzada Coltongo # 293, Col. Industrial Vallejo, Del. Azcapotzalco, C. P. 02300, Ciudad de México.
maneral
handle
chapetón plano
flat escutcheon
Causas
/ Causes
The main water valve is closed.
La palanca maneral se encuentra cerrada.
The lever handle is cosed..
Aireador obstruído
/ Clogged areator.
La presión de operación no es la adecuada.
The operating pressure is not adequate.
No angle valves are fully open.
La tuerca espárrago no esta apretada.
/ The shank nut is tight.
Posiblemente no estén firmemente apretadas.
/ Possibly not tight.
Comunícate:
Contact:
En la Ciudad de México:
In Mexico City:
01 55 53 33 94 00
Ext. 5804, 5805 y 5806
Desenrosque la tuerca de sujeción con la llave (incluida) y retire
17
el cartucho con camisa; saque el cartucho de la camisa y
reemplácelo. Arme nuevamente.
wrench (included) and remove the cartridge with cover; remove
the cartridge and replace it. Reassemble.
cartucho con
camisa
cartridge with
cover
Tenga cuidado con los filos de la
camisa, utilice guantes.
the edges of the cover, use gloves.
/
Abra las válvulas principales de agua (Pag. 3, paso 12).
Open the main water valve (Page 3, step 12).
/
Gire la palanca maneral, según la operación del producto (Pag. 3, paso 13)
Operación.
/ Open the main water valve (Page 3, step 13) Operation.
Retire el aireador y límpielo.
Verifique las especificaciones de presión mínima (página 1) /
/
Verify the specifications the minimum pressure (page 1).
/
Abrir totalmente las válvulas angulares. (Pag. 3, paso 12)
/ Fully open angle valves (page 3, step 12)
Apriete firmemente la tuerca espárrago (Pag. 2, paso 5).
/ Tigthen the shank nut (Page 2, step 5).
Apriete firmemente la conexión (Pag. 2, paso 7) instalación de
mangueras.
/ Thigten the connection (page 2, step 7) Install hoses.
En Monterrey:
In Monterrey:
En Guadalajara:
In Guadalajara:
(0181) 83 33 57 67
(0181) 83 33 61 78
(0133) 36 19 01 13
It is very important to follow the instructions below to preserve HELVEX products
finishes, shiny and in perfect condition:
1. Use only water and a clean cloth.
2. Do not use fibers, powders, abrasives, or chemicals.
3. Do not use sharp objects to clean the finish.
4. It is recommended to clean your product daily.
Note: See our tips on: www.helvex.com.mx
/
Remove the lock nut with the
tuerca de
sujeción
locknut
/
Be careful with
Soluciones
/ Solutions
/ Remove the aereator and clean.
/
4

Publicidad

loading

Este manual también es adecuado para:

Maxima e-932Maxima e-933Maxima ep-932Maxima ep-933