Technical Support - Apricorn Aegis Padlock 3.0 Guía De Referencia Rápida

Ocultar thumbs

página de 10

/ 10
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

Adding a New User PIN (cont'd)

CREATING FORCED ENROLLMENT STATE ALLOWING USER TO GENERATE USER PIN

Note: This can only be done if there isn't already a User PIN established on the key using the method above.

1. Enter the Admin Mode by holding

press the

button. The

2. Press 0 + 1 and the

3. Press the

button to return the key to its locked state. The key is now in User Forced Enrollment State,

allowing a User to establish his own User PIN.

USER-GENERATED USER PIN IN FORCED ENROLLMENT STATE

1. Press

and ensure that the

+ 1 and ensure that the

2. Press

the new User PIN and press the

BLUE

joined by the

3. Within 30 seconds, enter that same User PIN once more, and press the

LED will glow solidly for a few seconds, then the drive will return to its locked state, indicated by the

LED glowing solidly. The key's data can now be accessed using either the User PIN or the Admin PIN.

Locking the Padlock 3.0

To lock the key, simply press the

If data is still being written to the Secure Key, it will wait for this operation to be completed before the locking

operation takes place. The

Note: The Aegis Secure Key will not be recognized by any operating system in its locked state.

Unlocking the Padlock 3.0

1. Beginning in standby mode, press the

2. Enter either an Admin PIN or User PIN and press the

(If the PIN is accepted, the

it's plugged into a USB port, after which will then glow solidly;

If the PIN is incorrect, the

Upon correct PIN entry, the key will be unlocked and ready for use. If it is not plugged into a USB port

within 30 seconds, the key will return to sleep mode and automatically lock itself.

Formatting For Mac OS

The Aegis Padlock 3.0 comes preformatted in NTFS for Windows ® and is ready for use.

OS, you must first reformat the drive to a Mac compatible file system

inserted into a USB port, open the Mac Disk Utility from Applications/Utilities/Disk Utilities and

perform the following:

Aegis Padlock

1. Select the

2. Click the 'Erase' tab.

3. Enter a name for the drive. The default name is Untitled. The drive's name will eventually appear

on the desktop.

4. Select a volume format to use. The Volume Format dropdown menu lists the available drive

formats that the Mac supports. The recommended format type is 'Mac OS Extended (Journaled).'

5. Click the 'Erase' button. Disk Utility will unmount the volume from the desktop, erase it, and then

remount it on the desktop.

IMPORTANT

BACK UP COPIES OF

IMPORTANT DATA TO AT

LEAST TWO SECURE

LOCATIONS.

12191 Kirkham Road, Poway, CA, U.S.A. 92064

+ 0 for five seconds; With

BLUE

LED will glow solidly.

GREEN

LED will blink three times, then will be replaced by

BLUE

and the

BLUE

LED continues glowing solidly while the

button. The

LED glowing solidly.

button. When locked, the

button can also be used to exit out of the Admin mode.

button to wake the drive. (The

GREEN

LED will quickly blink four times, then continue to blink slowly until

RED

LED will blink three times and then glow solidly.)

from the list of drives and volumes.

RED

LED blinking, enter the Admin PIN and

GREEN

LEDs are glowing solidly.

GREEN

LED will blink three times by itself and then will be

RED

button.